The LW 320 B Al Nautic is designed for mobile use but also suitable for stationary applications.

It can optionally be used as a fully automatic stationary system by adding the available extras. It comes ready to start with 4 stroke Vanguard motor and with a lightweight and seawater resistant aluminum frame.

  • 4 stroke Vanguard drive motor 8.2 kW

  • Seawater resistant aluminum-frame (Colour: RAL 7004)

  • Crash frame c/w 4 carrying handles and sling eyes

  • Hour counter and integrated pressure gauge

  • Manual condensate drain

  • 4x Filling hose c/w filling valve

  • Pressure maintaining and non return valve

  • All pistons with steel piston rings

  • Low pressure oil pump

  • Oil- / Water separators in stainless steel

  • Safety valves after each stage

  • Filling pressure to your choice (200 or 300 bar)

  • Connections to your choice
    (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT)

  • Breathing air purification an accordance to EN 12021

  • Automatic condensate drain

  • Automatic stop at final pressure

  • 200 and 300 bar parallel filling pressures

  • Additional high pressure outlet

  • Oil pressure gauge

  • Wheel set

Technical Data

LW 320 B AL Nautic

Type:Air cooled piston compressor
Capacity [l/min] / [Nm3/h] / [cfm]:320 / 19.2 / 11.3
Max. Pressure [bar]:350
RPM [1/min]:1580
No of cylinders / No of stages:3 / 3
Prime mover type:4 stroke gasoline engine
Drive power [kW]:8.2
Cooling air requirement [Nm3/h]:2460
Lubrication type:Oil pump + Splash oil
Oil capacity [l] / Oil pressure [bar]:1.8 / 0.6 - 4.0
Operating temperature [°C]:+5°C to +45°C
Filter capacity [m3 at +20°C]:750 (approx. 39 h)
Dimensions L x W x H [mm]:1290 x 600 x 740
Weight [kg]:167
Noise level (measured at 1 m) [dB]:95