The LW 320 E Al Nautic is designed for mobile use but also suitable for stationary applications.

It can optionally be used as a fully automatic stationary system by adding the available extras. It comes fully wired with star/delta system and with a lightweight and seawater resistant aluminum frame.

Specifications
  • Electro motor (E-Motor / 400V / 3 Phase / 50 Hz)

  • Seawater resistant aluminum-frame (Colour: RAL 7004)

  • Crash frame c/w 4 carrying handles and sling eyes

  • Hour counter and integrated pressure gauge

  • Manual condensate drain

  • 4x Filling hose c/w filling valve

  • Pressure maintaining and non return valve

  • All pistons c/w steel piston rings

  • Low pressure oil pump

  • Oil- / Water separators in stainless steel

  • Safety valves after each stage

  • Filling pressure to your choice (200 or 300 bar)

  • Connections to your choice
    (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT)

  • Breathing air purification an accordance to EN 12021

Options
  • Automatic condensate drain

  • Automatic stop at final pressure

  • Auto start system

  • 200 and 300 bar parallel filling pressures

  • Additional high pressure outlet

  • Oil pressure gauge

  • Wheel set

  • Special voltages / frequencies on request


Technical Data

LW 320 E AL Nautic

 
Type:Air cooled piston compressor
Capacity [l/min] / [Nm3/h] / [cfm]:320 / 19.2 / 11.3
Max. Pressure [bar]:350
RPM [1/min]:1580
No of cylinders / No of stages:3 / 3
Prime mover type:E-Motor / 400V / 3 Phase / 50 Hz
Drive power [kW] with 50 Hz / 60 Hz:7.5 / 9.0
Cooling air req. [m3/h] with 50 Hz / 60 Hz:2250 / 2700
Lubrication type:Oil pump + Splash oil
Oil capacity [l] / Oil pressure [bar]:1.8 / 0.6 - 4.0
Operating temperature [°C]:+5°C to +45°C
Filter capacity [m3 at +20°C]:900 (approx. 46 h)
Dimensions W x D x H [mm]:1290 x 600 x 740
Weight [kg]:175
Noise level (measured at 1 m) [dB]:83