The LW 450 D Basic is ideal for use on a remote island, a safari boat or in an autonomous truck.

This 450 litre compressor is equipped with a hatz diesel motor, 12 volt control, automatic start, automatic condensate drain and an integrated filling unit with four hoses and filling valves.

The Basic version includes an integrated filling device c/w four filling hoses and filling valves.

  • Hatz 10kW diesel engine c/w hand start

  • Original Hatz diesel tank

  • Wet painted steel housing (RAL 7004)

  • Manuel condensate drain

  • Automatic idle speed selector when end pressure is reached (compressor switches to full speed)

  • 4x Filling hose and filling valve

  • Pressure maintaining and non-return valve

  • All pistons c/w steel piston rings

  • Low pressure oil pump

  • Oil- / water separators after each stage

  • Safety valves after each stage

  • 3x concentric suction/pressure valves

  • Filling pressure to your choice (200 or 300 bar)

  • Connections to your choice
    (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT)

  • Breathing air purification an accordance to EN 12021

  • 200 and 300 bar parallel filling pressures

  • Oil pressure gauge

  • Intermediate pressure gauges

  • Hour counter

  • Oil pressure monitoring c/w auto shut down

  • 0.8 ltr. Prefilter (Enlarged the lifetime of the filter by approx. 5 hours)

  • Automatic condensate drain

  • Additional high pressure outlet

Technical Data

LW 450 D Basic

Type:Air cooled piston compressor
Capacity [l/min] / [Nm3/h] / [cfm]:450 / 27.0 / 15.9
Max. Pressure [bar]:350
RPM [1/min]:1100
No of cylinders / No of stages:3 / 3
Prime mover type:Diesel engine, hand start
Drive power [kW]:10.0
Cooling air requirement [m3/h]:3300
Lubrication type:Oil pump + Splash oil
Oil capacity [l] / Oil pressure [bar]:2.2 / 2.2 (+/- 0.5)
Operating temperature [°C]:+5°C to +45°C
Filter capacity [m3 at +20°C]:750 (approx. 28 h)
Dimensions W x D x H [mm]:1270 x 740 x 1000
Weight [kg]:400
Noise level (measured at 1 m) [dB]:95